product-images-1
product-images-1
product-images-2s product-images-2s

EC-5MIPN

5 Megapixel Full HD Indoor/Outdoor Box Network Camera

5 Megapixels 5 Megapixels high resolution.
SD card Auto recording video into SD card when Network failed or motion detection or schedule recording.
ULCR With Ultra Low Compression Rate (ULCR®), gets excellent video quality but less storage space.
Low Lux Start Light Sensor support low lux. function allows to get high quality image in dark environment.
Surge With 6KV@102/700μS Differential mode for signal and 2KV @ 1.2/50μS for power surge protector, shields IP camera from surges in electrical power or lighting.
Day and Night application Removable IR-cut filter suit for Day & Night application.
Motion Detection Motion Detection function will monitor the changes in the camera's field of view and when intruder entering the area, alarm will be triggered.
Alarm Give instant alarm notification by providing a video picture to security personnel or video recording device.
2 Way Audio With Two-way audio, allows user to communicate with what appears on the monitors.
H.264 Codec Brilliant H.264 High profile/Low Profile/ Base line compression technology to save the storage space and transmission bandwidth.
ONVIF I-View's cameras are ONVIF 2.4 profile S and RTSP protocol supported. The third-party VMS/NVR are easily configure with I-View's camera.
Lens Swapable Easily change to C/CS mount lens according to different situation.


I-View’s EC-5MIPN is a 5-Megapixels resolution (2592 x 1920 pixels) and Day/Night Network Camera,delivers superior H.264-AVC performance, and comes with a removable IR-cut filter to provide crystal video for both day and night applications. The EC-5MIPN can capture more than 12x comprehensive area than a standard Full D1 camera, significantly reducing the number of cameras required. It is especiallysuitable for monitoring wide-open indoor spaces, such as commercial, banking, government buildings, schools, universities and airpor ts, or applications requiring accurate identification.

 
  • Onvif compliant.
  • Up to 5-Megapixel video resolution.
  • Built in TVS surge protector.
  • Built-in 802.3af compliant PoE.
  • Built in gyro sensor for tampering alarm.
  • Auto recording video into SD card when Network failed.
  • Video and interval snapshot schedule recording on SD card or FTP server.
  • Removable IR-cut filter for Day & Night function.
  • Flash light appears when alarm is triggered, acquiring better night image especially for car plate application.
  • WDR Enhancement for Unparalleled Visibility in Extremely Bright and Dark Environments.
  • H.264 /MJPEG multiple simultaneous streams.
  • On-camera motion detection and privacy mask.
  • Pixel Counter for Image Clarity Measurement.
  • Virtual ePTZ for efficiency surveillance.
  • ROI (Region of Interest) encoding is used to enhance the quality of images which are specified in advance.
  • Ultra Low Compress Rate (ULCR™) technology: LESS storage space, SAME video quality.
  • Free bundle 64-Channel NVR and CMS software.
Onvif compliant
i-View network devices are compliant to ONVIF profile S Specification, which assures that any device from other brands having the same compliance can configure, request, and control streaming of video data over an IP network from all i-View network devices.
High resolution is idealist for image representations
The notion of image representation is important for high resolution. An image representation object represents an image at a specific user size and pixel density. High resolution enhances picture quality so that it can display wider scene and more detailed. Higher resolution means that there are more pixels of color, providing a wider range of hues and a never-before-seen level of fine detail. This gives you a more dynamic view and lets you see what was cut off the edges when video were modified to fit the narrower ratio.
Built in gyro sensor for tampering alarm.
This function is a unique technology with gyro sensor that can detect and correct camera shake which often results from weather or other factors such as planes or cars. It will alarm once the camera has been moved to notice user.
Impressive Ultra Low Compress Rate(ULCR™)
I-View’s network camera with ULCR, provides impressive results. When there is no movement, with i-View ULCR technology, which provide same video quality but save over 50% storage capacity.
Wide operation temperature (-40°C ~ 60°C) rage.
The wide temperature range further enhances the performance and reliability in extremely cold and warm weather. When the camera has been install for outdoor without a heater or cooling fan, resulting in reduced energy consumption and simplified, more cost-effective installations.
Auto storage video on SD card when Network failed
Building SD card slots into cameras, enabling on-board recording of video and images. The simplicity of this solution has resulted in recording directly to the camera and provided reliable recording solutions, optimize bandwidth usage. The video will automatically back up to the SD card will the network is failed.
Region of Interest (ROI™)
ROI (region of interest) is an image cropping feature designed to achieve bandwidth / storage optimization through targeted image capturing. Users can select 1 key area(s) to transmit as separate streams for targeted preview and recording. Main video stream remains the biggest video resolution such as 1080P. The sub-stream can be cropped and scaled based on the main video stream for saving bandwidth and storage.
Built-in 802.3af compliant PoE
Power over Ethernet (PoE) is a way to power cameras with an Ethernet cord, which also gives the camera direct network access. Along with providing stable network connections by using a single network cable (including Cat-5, Cat-5e, or Cat-6) for both power and network. IP cameras wired for PoE have a special power switch in them which can use the power sent over the Ethernet cord, making installation easier by only requiring one cable.
Removable IR-cut filter for Day & Night function
A day and night camera is designed to be used in outdoor or in indoor environments with poor lighting, delivering color images during the day. As light diminishes below a certain level, the camera can automatically turn to night mode to make use of near IR light to deliver high-quality, black and white images. During the day, a day and night camera uses an IR-cut filter. When the camera is in black and white mode, IR-cut filter allowing the camera’s light sensitivity to reach down to 0.001 lux or lower.
System
Platform TI DM368 SoC CPU; 512MB Flash; 1024MB DDR II RAM and Linux 2.6 Embedded O.S.
Image Device
Chipset 1/2.5" CMOS progressive scan sensor.
Audio
 
G.711 Ulaw & G.711 Alaw audio encoding and decoding.
 
External microphone input and speaker output.
 
Support two-way audio.
 
2Vp-p audio in; 30mw audio output with 600Ω impedance.
Network
Protocol
HTTP, HTTPS, TCP/ IP, IPv4, IPv6, PPPoE, UDP, SMTP, FTP, QoS, DHCP, DDNS, NTP, DNS, SNMP, RTSP, RTP/RTCP, Bonjour, CSMA/CA, UPnP, IGMP, 802.1X
Interface
RJ-45; 10BASE-T/100 BASE-TX.
Compatible
Onvif compliant
Surge Protector
Power
2KV@1.2/50μS Common mode
Signal
6KV@102/700μS Differential mode
Security
 
Password Protection, User access log; IP address filtering
 
Multi-level user access with password protection.
Management
Time
management
Manual Time Setting; Time Server, NTP support and Real Time Clock.
Event
management
Events triggered by Motion detection or sensor with configured schedule.
Event
notification
Event notification using Alarm output triggered.
Update
Online Firmware update.
Browser
 
Internet Explorer 7.0 and above; Chrome, Safari, Firefox with Quick time Plug-In.
Management
Compression
0.1M–12M bits/sec (CBR/VBR/LBR); H.264 HP/MP/BL, M-JPEG.
Resolution
Main Streaming: 2592x1920, 2048x1536, 1920x1080,
1280x960, 1280x720
Sub streaming: 640x480, 640x360, 320x288, 320x240
Frame Rate
10fps@5MP; 20fps@3MP; 30fps@2MP; 30fps@1.3MP; Frame rate adjustable.
Control
Brightness, Contrast, Saturation, Sharpness, Exposure, Motion detection, Mirror, Shutter, Privacy mask, Flicker less, Noise reduction, IRIS, AES, AWB, 3D-NDR, AGC, BLC, WDR, ROI, Audio gain, Alarm in/out. Video recording by scheduling Network failed, Interval Snapshot schedule recording.
WDR
120dB
Color
0.5 Lux /F1.2 ; B/W: 0.3 Lux, 0 Lux, When IR LED is on.
Overlay
Text / Time Stamp.
I/O Port
Standard
Audio in x1; Audio out x1; DC power in, RJ-45, RS-485
Option
Alarm out; Sensor in x1; Video out, Reset, SD card slot.
Lens
Lens
C/CS Mount Support.
IR Cut
Built in removable IR-cut filter for day & night function
IR
Illuminators
N/A
Storage
 
Micro SD slot for SD/SDHC card storage; Support Pre-recording and Post recording; Network failed start recording on SD card, SD card failed indicator. Backup/Restore to device configuration file to FTP/SMTP sever.
Housing
 
Aluminum housing with Waterproof criterion.
 
148mm x 56mm x 78mm / 0.98Kg
Operation
Power
consumption
Maximum 3W.
Support PoE IEEE 802.3af Class 3; DC12V/AC24 (Optional)
Temperature
0°C ~ 50°C; Humidity 20% ~ 80% RH
Certificated
 
CE, FCC, RoHS, IP67, IK10
*Product specifications are subject to change without notice.

    Document typeFile DescriptionProduct NameRelease dateVersionSize DownloadDownloadNote

  • .PIPT4-V1.2.1.49B16071809-standard.pIP Camera Firmware2017/10/05IPT4-V1.2.1.52B1701211229,155.5kdownloadNote
    This Firmware version suits for DM-5MIPN series, DM-3MIPW series, DM-2MIPS series, DM-2MIPN series, IR-5MIPN series, IR-3MIPW series, IR-2MIPS series, IR-2MIPN series, EC-5MIPN, EC-3MIPW, EC-2MIPS, EC-2MIPN, FE-5MIPN-F01, FE-5MIPN-F01-W, FE-5MIPN06-F01, FE-5MIPN06-F01-W, FDMO-2MIP-20XIR, FDMO-2MIP-30XIR Network came
  • .PIPT4-V1.2.1.52B17012112-standard.pIP Camera Firmware2017/02/10IPT4-V1.2.1.52B1701211229,786.0kdownloadNote
    This Firmware version suits for DM-5MIPN series, DM-3MIPW series, DM-2MIPS series, DM-2MIPN series, IR-5MIPN series, IR-3MIPW series, IR-2MIPS series, IR-2MIPN series, EC-5MIPN, EC-3MIPW, EC-2MIPS, EC-2MIPN, FE-5MIPN-F01, FE-5MIPN-F01-W, FE-5MIPN06-F01, FE-5MIPN06-F01-W, FDMO-2MIP-20XIR, FDMO-2MIP-30XIR Network camera.
  • .pdf2015 I-View Brochure_.pdfAll in One Brochure file2016/02/15V 2.03,117.2kdownloadNote
    2015 All-in-One Brochure file
  • .PDFEC-5_3_2MIPn quick manual V2_1.pdfBox Network Camera Quick Menu2015/05/14V2.11,173.5kdownloadNote
    This Quick manual suits for EC-5MIPN, EX-3MIPW, EC-2MIPS and EC-2MIPN Box Network camera.
  • .rarupdatetools_1_3_20.zipIP Camera Firmware Update tools2017/08/24V 1.3.207,701.8kdownloadNote
    This IP search and Firmware update tools suits for DM-12MIPS series, DM-6MIPS series, DM-5MIPN series, DM-3MIPS series, DM-2MIPS series, DM-2MIPH series DM-2MIPN series, DM-2MIPC SERIES, IR-12MIPS series, IR-6MIPS series, IR-5MIPN series, IR-3MIPW series, IR-2MIPS series, IR-2MIPN series, IR-2MIPC series, EC-5MIPN, EC-3MIPW, EC-2MIPS, EC-2MIPN, FE-5MIPN-F01, FE-5MIPN-F01-W, FE-5MIPN06-F01, FE-5MIPN06-F01-W, FDMO-2MIP-20XIR, FDMO-2MIP-30XIR Network camera.
  • exeIPFinder.exeIP Camera finder2018/09/20V1.2173,973.4kdownloadNote
    This program can search IP address, Change IP address, Batch configuration IP address search, parameter configuration, and Firmware update tools function.
  • PIPH7-V1.1.4.29B18042417-standard.p2MIPC series IP camera firmware2017/08/04IPH7-V1.1.4_29B1804241727,936.5kdownloadNote
    This Firmware version suits for DM-2MIPC01 series, DM-2MIPC04 series, IR-2MIPC18 Series, IR-2MIPC04 series Network camera.
  • PIPH6-V1.0.1.13B_Kernel_TEST_171111409-standard.p12MIPS series IP camera firmware2018/02/26IPH6-V1.0.1.13B_Kernel_TEST_171111409-standard31,307.5kdownloadNote
    This Firmware version suits for DM-12MIPS04 Dome series, IR-12MIPS08 Bullet series, FE-12MIPS06 Fisheye Series Network camera.
  • pIPH2-V1.1.0.96B18010317-standard.pIP Camera Firmware2018/02/26IPH2-V1.1.0.96B18010317-standard24,672.0kdownloadNote
    This Firmware version suits for DM-6MIPS series, DM-3MIPS series, DM-2MIPP series, DM-2MIPH series, IR-6MIPS series, IR-3MIPS series, IR-2MIPP series, IR-2MIPH series, EC-3MIPS-F04 Hidden Camera, EC-2MIPH Series, EC-3MIPS Series, EC-6MIPS Series Network camera.