product-images-1
product-images-2s

FDMO-22XIR

650TVL, 150M IR, 22X Optical Zoom, IP66, Auto Tracking, Smart LED, D-WDR, Whiper

Low Lux Start Light Sensor support low lux. function allows to get high quality image in dark environment.
Surge With 6KV@102/700μS Differential mode for signal and 2KV @ 1.2/50μS for power surge protector, shields IP camera from surges in electrical power or lighting.
Day and Night application Removable IR-cut filter suit for Day & Night application.
IP 66 IP66 rate waterproof housing protected from dust and low pressure jets of water in all directions.
Motion Detection Motion Detection function will monitor the changes in the camera's field of view and when intruder entering the area, alarm will be triggered.
Alarm Give instant alarm notification by providing a video picture to security personnel or video recording device.


I-View FDMO-22XIR is a high performance day/night speed dome camera suitable for professional surveillance applications. The IP66-rated housing protects the camera body against rain and dust to ensure operation under extreme weather conditions. The FDMO-22XIR is especially suitable for monitoring wide open indoor/outdoor spaces such as airports, highways, parking lots, and shopping malls, where high-level reliability and precision are always required. The FDMO-22XIR supports high-performance 36x Optical Zoom and offers extra video quality with resolution up to 650TV Lines. With sophisticated pan/tilt mechanism, the camera provides fast, precise movement with continuous 360-degree pan and 90-degree tilt. Users can easily control the lens position via a mouse or a joystick to track the object of interest in and set up to 128 preset positions for patrolling. As with all I-View true day/night cameras, the FDMO-22XIR features are movable IR-cut filter, maintaining clear images 24 hours a day. With other advanced features such as IP 66, IK10 citification, auto tracking, Wiper, wide operation temperature range, the FDMO-22XIR is the best choice for the most demanding outdoor surveillance applications.

 
  • 22x Optical/ 10x Digital zoom Lens.
  • 8 cruising tracks, each cruising track has 128 presets.
  • 8 auto scan with user-defined boundaries position.
  • On-camera motion detection and privacy mask.
  • Intelligent objection tracking and Smart LED illuminator.
  • Intelligent objection tracking for efficiency surveillance.
  • Smart to adjust the IR LED light across the entire area to get a well illuminated image.
  • Support wiper for clean the rain and dust.
  • Pan 0.01~360°/Sec, Tilt 0.01~120°/Sec. preset speed/li>
  • 4 pattern tours with 500 programmable instructions.
  • Removable IR-cut filter for Day & Night function.
  • Run action (Preset/Tour/Pattern/Scan) schedule via user-defined.
  • IP 66 Weather-proof rated Housing.
  • Built-in 8 pieces High power VCSEL IR Illuminators, effective up to 150 meters.
  • Wide operation temperature (-35°C ~ 60°C) rage.
Specification
Camera
Image Sensor 1/3" SONY EXview HAD CCD II (Effio)
Focal Length
22x(f=3.95~85.8mm/ F=1.6-F3.7); 10x Digital zoom
Sync System
Internal/External (V-lock)
Electronic Shutter
1/1 to 1/10,000 s, 22 steps
White Balance
Auto Mode IS/PS Mode
Wide Dynamic Range
Digital WDR; On/Off
Backlight Compensation
On / Off
Gain
Auto/Manual
Flicker Cancel
On / Off
Focus System
Auto/Manual
Picture Effects
Black & White, Mirror Image, Color
Privacy Zone Masking
On / Off
Pan/Tilt
Pan / Tilt Angle 360o continuous pan rotation/ 90o(Auto Flip)
Pan/Tilt Speed (Menu)
Pan 0.01o~180o, Tilt 0.01o~100o (High speed) Pan:0.5o~35o/S, Tilt:0.5o~35o/S (Vair-speed)
Preset Speed 360 o/S (high speed) / 35o/S (Vari-speed)
Presets Number/Accuracy
220 / +/-0.1o
Guard Location The dome will rotate back to preset position after a period of vacant time
Auto Scan 8 auto scan tracks, user-defined left and right boundaries and scan speed
Auto Cruising
8 cruising tracks, each cruising tracks has 16 preset positions, User-defined dwell time
Pattern Tour 4 groups, each one with 500 programmable instructions
Park Action Preset / Tour / Pattern / Scan
PTZ Position Display
ON/OFF
Freeze Frame Yes
Smart-tracking Yes
Infrared
IR irradiation distance
150m
IR irradiation angle
Adjustable by zoom
Alarm
Alarm Input
7 Inputs
Alarm Output
2 channel relay output, with configurable alarm actions
Alarm Actions
Preset, patrol, pattern, SD/SDHC card recording, relay output, notification on client
Input & Output
Composite Output
1.0Vp-p / 75Ω, composite, BNC
Audio Input
2Vp-p; output impedance: 600Ω
Audio Output
Line level, impedance: 600Ω
Video
Composite Output
1.0Vp-p / 75Ω, composite, BNC
S/N Ratio More than 50 dB
Minimum Illumination

0.1 lx. (F1.0, Color); 0.05 lx (B/W, CR)

Signal System
PAL/NTSC (Optional )
Horizontal Resolution
650 TV Lines (Color); 700TV lInes (B/W)
General
Menu Language
English / Chinese
Protocols
Auto Compatible PELCO_P, PELCO_D
Operation
Temperature: -35°~ +60°C; Humidity: 0~90%
Power Supply
12V/3A VDC: 36W Maximum when IR LED on.
Protection Level
IP66 standard (outdoor dome)
TVS 4,000V lightning protection, surge protection and voltage transient protection
Mounting
Wall Mount/Ceiling mount optional
Dimensions
Φ220×304mm
Weight (approx.)
5Kg
Mount Option
Long-arm wall mount, Corner mount, Pole Mount, Power box mount
Certificated
  CE, FCC, RoHS, IK10, IP66.
*Product specifications are subject to change without notice.

Transmit video/power signals up to 300 meters.
Good video quality at a fraction of the cost.
Superior interference immunity.
Built-in video & power surge best for outdoor use.
Plug & Play with existing LAN Cable.
One UTP cable transmits video/power; no need power cabling again.
Lower labor costs to install vs. coaxial cable {(1) 25 pair UTP pull = (1) coaxial cable pull}.
Higher density and lower weight than coaxial cable. (1/10th the size).
Lower cost for conduit and cable trays, uses less space in cable pathways.
Significantly lower cost for low-smoke UTP vs. low-smoke coaxial cable
Can work with Hybrid (Analog + IP) CCTV system and extent IP camera transmission distance.
Easier termination than coaxial cable or optical fiber.
Central power management with UPS; no worry power failed.

 

Easier installation and less expensive than dedicate coaxial cable.

 

1 Camera 300 meters (1000 feet) Coaxial Cable UTP Cable
Signal cable 0.33 cts/foot (RG 6): $420 0.16cts/foot (PVC)   $160
Power supply cable 1 pair 24AWG 0.07cts/foot (PVC):  $70 0 -    $  0
Terminals BNC connectors x 2: $5.8 RJ45 connectors x 2:  $1.6
Cable handling $20/hour x 6 hours:  $120 $ 20/hour x 3 hours:  $60
Camera IR Camera:        $ 70 IR UTP Camera:     $90
Total $ 685.8 $310.6
    Savings of 55%


Minimizes the picture quality loss in longer-distance transmission.
The UTP transmission is useful in situations where runs longer
than a couple of hundred meters have to be made.


Item / Cable Optical Cable Coaxial Cable UTP Cable
Transfer speed Super excellent Excellent Excellent
Video transmission distance Several 10 km Max. 1 Km Max. 2.4 Km
Transfer signal Video/Data Video Video/Power/Data
Transmission equipment cost High None Low
Image quality / Distance Most excellent Normal Excellent
System expense / Distance High High Low
Characteristic impedance None 75Ω, 50Ω 100Ω
Cable expense High High Low
Cable pliability Bad Normal Excellent
Installation workability Bad Excellent Super excellent
Maintenance expense Very high Normal Low
Engineer adaptability Bad Normal Easy
Tool expense for installation Very high Normal Low
System applicability Normal Normal Super excellent

 

 

 1.  The trends in surveillance network transmission have been dramatically changing.

Early Days:

Today:

Tomorrow:

1. Coaxial dominated

2. Other technologies were used to solve problems

3. Convergence was a term in other industries

1. UTP has gained widespread acceptance

2. IP has experienced much hype, but is moving more slowly than predicted

3. All technologies growing at the expense of coax

1. Hybrid video solutions will be core to the market

2.IP will continue to experience growth

3. Convergence of IT and physical security will accelerate.

 

2. Migrating your Analog System to IP
We all realize the CCTV industry is migrating forward to an all-digital approach. The speed of that migration is dependant on performance (video quality) and cost. For similar quality, today’s IP video is still quite pricey, especially when viewed from a total cost of ownership basis. Given the current economic pressures, most end-users are confronting shrinking surveillance budgets. The good news is that you can use a structured cabling network to deploy a hybrid video system. The migration to IP does not necessarily mean your systems are limited to IP cameras on unshielded twisted pair (UTP) or fiber, or only analog cameras on coaxial. Instead, a hybrid UTP system makes the best use of a blend of analog cameras, encoders and cost effective hybrid DVRs on a structured wiring network.   To move forward in this way that supports this migration and still meets your budget and still can keep the flexible and extendable system.
 
3. Upgrade your CCTV easily to meet your future request.
Structured cabling via hybrid is an economic and intelligent choice. Labor is a big component of the cost of any installation.  When deploying an analog camera system, large cost reductions can be achieved by using a multi-pair UTP cable (25, 50, 100 pair etc.) between the IDF and MDF wiring closets. When the time is right to take the digital plunge, simply disconnect the transceivers and install the digital camera and related PoE equipment as specified with no changes needed to the cabling infrastructure. That largest part is already installed and expensed.

There are choices regarding the media used for cabling infrastructure, which lend themselves to flexible migration choices. The most common media for IP transmission is UTP. UTP will support both LANs and data centers to the next level of transmission performance and match the current highest speed offered by optical fiber. As a result, physical security networks, LANs and data centers can be upgraded today for the protocol of tomorrow, all at a better price and in a well-recognized and standard footprint.  Whether you are deploying an analog, a hybrid, or an end-to-end IP-based system, UTP is worthy of review and consideration.
 
4. Save the cabling and maintain cost, it is a cost effective solution.
Structured cabling should be used in all hybrid surveillance systems. Here, the media deployed can drive down system cost and increase product choice whether or not you are using analog or Ethernet as the transmission method for video. Structured cabling has been used in the LAN data and telecommunications world for decades. It is quick to install, easy to change and can be performance certified to an industry standard. This performance standard rating is dependent on whether Category 5e, Category 6, or augmented Category 6 components are used and EIA/TIA installation rules are followed.  Four-pair UTP is a true utility for both analog and IP surveillance system transmission. For a hybrid video system, only one pair of UTP transmit analog video, allowing the unused three pairs to be used for other things, typically power and telemetry.  When using coaxial, you would have to pull three separate wire types to get the same functionality. The same advantages of 4-pair UTP cable applies to IP based systems; a single 4-pair can transport the Ethernet IP video signal, power the camera via power over Ethernet (PoE), and control the PTZ.

 

Allow you to transmit analog video up to one mile and supplies (low cost) low-voltage camera power at distances greater than PoE.
Uses analog cameras and hybrid DVRs to provide the best of both worlds.
Stream 25/30 Frame Per Second high-resolution video with little impact to the LAN.
Only one IP address per DVR vs. multitudes of IP addresses for each camera.
Scheduled network maintenance won’t stop a hybrid system from recording.
No telemetry or video latency.
Virus protection issues are limited to the DVR instead of all the cameras.
Provides a cost effective, standards based migration path to full IP.

 

PW-1215 DC12V/1.5A Switching Power Adapter Package
AC-100-230V input; DC12V/1.5 output.
Built-in 1-int / 4-out splitter cable.
Support 4 pcs UTP Dome Camera power up to 300 meters transmission via Cat.5 UTP cable.

 
   
PW-1204 DC12V/4A Switching Power Adapter Package
AC-100-230V input; DC12V/4 output.
Built-in 1-int / 8-out splitter cable.
Support 8 pcs UTP Dome Camera power up to 300 meters transmission via Cat.5 UTP cable.

 
   
UY Connector
Tool less design; easy to use and maintain
Low connection loss

 

    Document typeFile DescriptionProduct NameRelease dateVersionSize DownloadDownloadNote