product-images-1
product-images-2s

EoC-100V

Ethernet Over Coax Extender, 200 meters, Active type, Plug & Play.



Features
  • Ethernet over Coax - Converts Ethernet UTP to transmit network data and PoE over standard coax cable.
  • Saves costs and time – Avoids rewiring and expense of traditional Ethernet UTP cable.
  • High data rate – Support 100 Base-T for high network bandwidth requirements of Mega-pixel cameras or multiple IP cameras.
  • Easy to install - No IP or MAC address configuration and other networking setup required.
  • Easy upgrade to IP - Converts existing analog CCTV system over coaxial cable to retrofit analog CCTV installations into IP Digital systems.
  • Extends standard Ethernet – Transmits10/100Base-T up to distances of 250 meters (750 feet)*.
  • Compatible capability - Fully transparent to Ethernet networks and higher layer protocols.
  • Rack Mount - Supports 19"rack mount of industry standard.
  • Built-in surge protector best for outdoor installation.
Note:
*The above test result table that is NO GUARANTEE of possible cable lengths, data rates and power transmission,
as various physical factors are not within the area of responsibility of I-View. The nominal data rate, connection length
and power transmission can only be individually tested and determined at the place of installation.
**The Power/Distance Calculator can be found at www.i-view.com.tw
 
Applications
● Upgrading to IP

Retrofit analog CCTV installations into digital systems, delivering full network connectivity and standardized, centrally-sourced power without re-cabling.

● New installations

With the familiarity of coaxial cable and the reliability and cost advantages of PoE, it is an effective choice for the installation of new IP video systems where cable runs may be longer than standard 10/100 Base-T and hard to get power area.

● Long distance extension

Connecting Ethernet/PoE over coax Extender system back-to-back allows the network signal to be repeated without local power, enabling extension of Ethernet up to 250 meters (750 feet)

● Networked just there's coax

The ability to convert coax into a network connection without requiring power has many advantages in upgrading CATV or satellite systems in hotels or other buildings, amoung other applications.

● Elevators and mechanisms

Coaxial cable has the advantage being coil and bendable, compare to UTP cable. The Ethernet/PoE over 2-Wire Extender system provides a better solution for network access to elevator carriages, such as Security video, Access controller, VoIP and Digital signage.

 
Specification
Ethernet
Connector RJ-45
Connectivity 10/100 Base-T auto-negotiation
Wire type Cat.5 or better
Distance Less than 2 Meters
Cable Link
Connector BNC
Type Transceiver (Passive)
Wire type 75 Ohm Coaxial Cable
Distance1 250 Meters*1
Topology Point to Point
Encryption None
Latency Base on transmission distance
Bandwidth 100 Mbps
Power
Power Source
None
Power Output None
Physical
Waterproof
Option
Dimensions (mm)
100 x 55 x 34
Weight
140g
Housing
Aluminum
LEDs
Status indicators
Ethernet link
activity
Environment
Temperature Operation: 0℃to 50℃/ 14℉ to 122℉
Humidity 20% ~ 85% non-condensing
Power consumption ≤ 1W
Transient immunity
None
Accessories
See the ordering information
Certificated
  CE, FCC, RoHS.
*Product specifications are subject to change without notice.
*EZLink is trademark of I-View Communication Inc.; All others trademarks are belonging to the respective owners.
*1.Testing base on RG6 Coax cable @0.06Ω/Meter DC loop resistance, TP-LINK TL-SF1008D switching HUB and PC.
Diagram-EoC
EoC-110V EoC-110V
EoC-100V EoC-100V
EoC-100V EoC-110V
EoC-100V EoC-100V EoC-110V EoC-110V EoC-410V
Accessories Features
RMP-419 19 Inches Mount Panel
  • Allow 4 sets EPoC/EoC devices in 1 U high of 19"cabinet.
  • Combine with EPoC/EoC devices flexibly.
  • Maintain easily with modularized design.
  • Save maintenance costs by swapping EPoC/EoC module.
  • Suit for 4pcs EoC-100V, EoC-410V, and, EPoC-131VA units.
 
WH-100B Waterproof Housing
  • IP 66 design best for the outdoor application.
  • Suit for EoC-100V, EPoC-111PS, and, EPoC-131PS unit.
Order Information
EPoC-131VA:Ethernet /PoE over Coax Receiver.
EPoC-131PS:Ethernet /PoE over Coax Transmitter.
PW-4805A:DC48V/0.5A power supply for PoE power input source.
PW-4813A:DC48V/1.35A power supply for PoE power input source.
PW-5608A:DC56V/0.8A power supply for PoE power input source.
RMP-419:19 inches Rack Mount Panel for 4pcs EoC-100V, EoC-410V, EPoC-131VA, units.
WH-100B:Wall mount waterproof box for EoC-100V, EPoC-111PS, and EPoC-131PS unit.
RMP-419:19 inches Rack Mount Panel for 4pcs EoC-100V, EoC-410V, EPoC-131VA, units.
WH-100B:Wall mount waterproof box for EoC-100V, EPoC-111PS, and EPoC-131PS unit.
TBNC-01:T-type BNC connector.
BTB-100:BNC to Terminal block.
BRK-001:
The Bracket allows EPoC-131PS to be placed between a box camera and camera housing and it’s mount.

    Document typeFile DescriptionProduct NameRelease dateVersionSize DownloadDownloadNote

  • .pdfEOC-100V-O Operation Menu V1_2.pdfEOC-100V Active Ethernet over Coax Transceiver Operation Menu2015/11/30V1.21,254.2kdownloadNote
    This menu file for Active EOC-100V Ethernet/PoE over Coax Transceiver product.
  • .pdfEOC_EPOC over Coax.pdfEPoC/EoC over Coax Datasheet2015/10/27V1.131,429.7kdownloadNote
    Ethernet/PoE over Coax cable datasheet file
  • .pdfEthernet over Coax .pdfEthernet over Coax Datasheet2015/11/30V2.01,983.2kdownloadNote
    The Datasheet has including EOC-110V, EOC-410V and EOC-100V product models.
  • .pptxEPoC_EoC systems introduction.pptx.pptxEthernet/PoE over 2-Wire Presentation file2015/08/19V 2.12,622.0kdownloadNote
    The presentation material for Ethernet/PoE over 2 Wire ad EoC Ethernet over Coax Extender product series.