product-images-1
product-images-2s

CRX-104PVAD

Support Video/power/data transmit via a single coaxial cable and up to 2 Km transmission distance. This transmission system will let the PTZ camera installation simple, easy and saving-cost.



We develop and create complete CCTV transmission solutions of Video/Power/Data transceivers systems over ordinary Coaxial cable. i.e. Video/power/ data can transmit via a single coaxial cable and the transmission distance can over 2 Km. This transmission system will let the PTZ camera installation simple, easy and saving-cost.
The Model CTX-104PVADVideo/ Data Transmitter +12VDC/4A or 24VAC/2A Converter is a transmitter combined with an AC80-65V-to-12VDC or AC 24V converter. Designed to fit on the back of a fixed 12 VDC or 24VAC Speed dome camera application, this unit is architect to convert AC80-65V power from the control room (DVR Site), while use with CRX-104PVAD delivering real-time video, audio, data signals and power at extended distances, all over single coaxial cable. The PVAD transmission system builds in diagnostic LED display load/no-load at a glance and surge protection, damaging voltage spike problems are eliminated.

 
  • Multi Signals: Video, Power, Data (RS422, 485) transmission over one standard CAT. 5 UTP cable.
  • Long Distance: Up to 2 Km transmission distance via coaxial cable.
  • Interference: Superior interference immunity.
  • Power Backup: Centralized power management through UPS at DVR site, no worry for power blackout.
  • Secure: Secure the video signal by RF Modulation transmission.
  • High Power: Provide AC24V/2A & DC12V/4A high current power.
  • Surge Protection: Built in power/video/data surge protector for best outdoor usage.
  • Indicator: LED indicator to show the status of Power, Video, Data transmission.
  • Supports 19rack mount.
  • Safety: Safer power construction via AC65V/1A.
Specification
Signal Video/Audio/Data/Power
Communication Receiver
Video System NTSC/PAL
Connector
F Connector: RF Signal& AC Power /75 Ohm; Video in/out (BNC):1Vp-p /75 Ohm; Audio in/out (BNC): 3 Vp-p /100 Ohm; 4 Pin Socket (2.54mm): Power input; 4 Pin Socket (3.96mm): Power output; Terminal Block: RS-485; Power jack: DC12V Output
Output/Sensitivity 108dBm ( Typ.)
Surge Protection
DC Breakdown Voltage: 350V ± 15% (@rising voltage 100V/s); Impulse Breakdown Voltage:≦700V (@rising voltage 1KV/μs); Insulation Resistance: ≧ 10000MΩ
Indicator
Red: Power; Green: Video/Audio/Data
Transmission
RG 11: 1000M; RG 6: 700M; RG 59: 400M
RS-485
Simplex; 0 ~ 19,200 BPS
Gain
N/A
Output Power AC80V
Dimension (L x W xH)
200x145x44 mm
Weight
2Kg
Certificated
  CE, FCC, RoHS.
*Product specifications are subject to change without notice.
*All test base on DC12V/1A power consumption and RG 11: Attenuation 2 dB/100 M@ 40MHz; 2.5Ω/100M; RG 6:Attenuation 4 dB/100 M@ 40MHz; 10Ω/100M; RG 59: Attenuation 8 dB/100 M@ 40MHz; 15Ω/100M.
*EZLink is trademark of I-View Communication Inc
*All other trademarks belong to their respective owners.
  • Power / Video / Audio / Data Transmission

RMP-319 19 inches Rack Mount Panel
Allow 3 sets of CRX-300VP devices in 1 U high of 19"cabinet.
Maintain easily with modularized design.
PS8002-AC AC 80V Power Supply
Input: AC110V or 220V; Output: AC80V/0.2A
Using by Toroidal power transformer.
Dimension: 95x 63 x 58 mm (L x W x H) (W/O Cable)
Weight: 0.64 Kg
PS8004-AC AC 80V Power Supply
Input: AC110V or 220V; Output: AC80V/0.4A
Support 2 pcs PI-1201A (DC12V/1A) or PI-1202A (DC12V/2A) power demodulator.
Dimension: 95x 63 x 58 mm  (L x W x H) (W/O Cable)
Weight:  0.8 Kg
PI-1201A DC12V/1A Switching Power Demodulator
Input: AC40-90V; Output: DC12V/1A
Dimension: 72 x 26 x 41 mm  (L x W x H) (W/O Cable)
Weight:  80g
PI-1202A DC12V/2A Switching Power Demodulator
Input: AC40-90V; Output: DC12V/2A
Dimension: 68 x 42 x 25 mm  (L x W x H) (W/O Cable)
Weight:  160g

    Document typeFile DescriptionProduct NameRelease dateVersionSize DownloadDownloadNote

  • PDFEz Link Coax cable transmission Data sheet.pdfData Sheet2014/08/01v 2.01,186.7kdownloadNote