product-images-1
product-images-2s

CRX-100VAP

Support Video/power signals transmit via a single coaxial cable and up to 1.6Km transmission distance. This transmission system will let the camera installation simple, easy and saving-cost.



I-View develops and creates complete CCTV transmission solutions for Video/ Power/ transceivers systems over ordinary Coaxial cable. i.e. The Video/ Power signals can be transmitted via a single coaxial cable and the transmission distance can be up to 1.6 Km. This transmission system will make the camera installation simple, easy and saving-cost.
The Model CTX-101VAP Video/ Power Transmitter +12VDC/1A or 12VAC/2A Converter is a transmitter combined with an AC40-85V to 12VDC converter. Designed to fit on the back of a fixed 12 VDC camera and IR LED, this unit is architect to convert AC40-85V power from the control room (DVR Site), while use with CRX-100VAP delivering real-time video, audio and power signals at extended distances, all over single coaxial cable.
The Receiver CRX-100VAP in the control room (DVR Site), which allow AC110 or 220V inputs that can support at distance camera loads up to DC12V/1A for RG-11cable runs under 4,800ft (1,600m) or RG-6 cable runs under 3,000ft (1,000m). The Video/ Power transmission system has built-in diagnostic LED to display load/no-load at a glance and surge protection, damaging voltage spike problems are eliminated.

 
  • One cable Solution: Video/Power signals transmit over one coaxial cable.
  • Long Distance: Up to 1.6 Km transmission distance via coaxial cable.
  • Surge Protection: Built in surge protector for best outdoor usage.
  • Interference: Superior interference immunity.
  • Secure: Secure the video signal by RF Modulation transmission.
  • Rack Mount: Supports 19"rack mount.
  • High Current: Power on line supports DC12V/1A or 2A.
  • Save costs: One cable solution and no need to set up power cabling for the camera.
  • Indicator: LED indicator to show the status of Power and Video/Audio transmission.
  • Safety: Safer power construction via AC80V/1A.
  • Power Backup: Centralized power management through UPS at DVR site, no worry for power blackout.
Specification
Signal Video/Audio/Power
Video F Connector: RF in & AC out / 75 Ohm
Video Video Out (BNC):1Vp-p / 75 Ohm
Video
Audio Out (BNC): 1 Vp-p /100 Ohm
Video 4 Pins Socket: AC Power input
Video System
NTSC/PAL
Transmission / Receiving Level
105dBm( Typ.)
Gain Controller
0-20dBm (Adjustable)
Transmission Distance*1
RG 11: 2000 Meters (Attenuation 2 dB/100 M@ 40MHz; 2.5 Ohm/100M impedance)
Transmission Distance*1
RG 6: 1000 Meters (Attenuation 4 dB/100 M@ 40MHz; 10 Ohm/100M impedance)
Transmission Distance*1
RG 59: 500 Meters (Attenuation 8 dB/100 M@ 40MHz; 15 Ohm/100M impedance)
Input Power
AC 110V or 220V
Output Power
N/A
Surge Protection
DC Breakdown Voltage: 350V ± 15% (@rising voltage 100V/s)
Surge Protection
Impulse Breakdown Voltage: ≦ 700V (@rising voltage 1KV/μs)
Surge Protection
Insulation Resistance: ≧ 10000MΩ
Indicator
Red: Power indicator / Green: Video/Audio indicator
Environmental
Temperature: -10 ℃ ~ 60℃; Humidity: 0~95 % (Non-Condensing)
Dimension (L x W x H)
70x97x35 mm (Non-Condensing)
Weight
0.3Kg
Certificated
  CE, FCC, RoHS.
*Product specifications are subject to change without notice.
*All test base on DC12V/1A power consumption and RG 11: Attenuation 2 dB/100 M@ 40MHz; 2.5Ω/100M; RG 6:Attenuation 4 dB/100 M@ 40MHz; 10Ω/100M; RG 59: Attenuation 8 dB/100 M@ 40MHz; 15Ω/100M.
*EZLink is trademark of I-View Communication Inc
*All other trademarks belong to their respective owners.
  • Power / Video / Audio Transmission

PS8002-AC AC 80V Power Supply
Input: AC110V or 220V; Output: AC80V/0.2A
Using by Toroidal power transformer.
Dimension: 95x 63 x 58 mm (L x W x H) (W/O Cable)
Weight: 0.64 Kg
PS8004-AC AC 80V Power Supply
Input: AC110V or 220V; Output: AC80V/0.4A
Support 2 pcs PI-1201A (DC12V/1A) or PI-1202A (DC12V/2A) power demodulator.
Dimension: 95x 63 x 58 mm  (L x W x H) (W/O Cable)
Weight:  0.8 Kg
PI-1201A DC12V/1A Switching Power Demodulator
Input: AC40-90V; Output: DC12V/1A
Dimension: 72 x 26 x 41 mm  (L x W x H) (W/O Cable)
Weight:  80g
PI-1202A DC12V/2A Switching Power Demodulator
Input: AC40-90V; Output: DC12V/2A
Dimension: 68 x 42 x 25 mm  (L x W x H) (W/O Cable)
Weight:  160g

 

    Document typeFile DescriptionProduct NameRelease dateVersionSize DownloadDownloadNote

  • PDFEz Link Coax cable transmission Data sheet.pdfData Sheet2014/08/01v 2.01,186.7kdownloadNote