product-images-1
product-images-2s

PAC-080M Amplifier

I-View's NVR utilizes intelligent video analysis to observe and filter out the possible crimes, broadcast automatically the pre-recorded warning voice messages or make announcement toward to each and specific illegal behavior, to reduce and discontinue the possibilities of the crimes. This innovative product will bring a safer, prompter and more thorough protection for the people and society.

UPS AnyNet NVR/Hybrid DVR integrate UPS system such as APC, CyberPower, MGE, and YEC...etc. to provide continuous services 24/7 against unexpected power outages.
Watchdog Timer Support S/W & H/W Watchdog timer, it is an embedded timing device that automatically prompts corrective action upon system malfunction detection.


I-View Communication Inc. is dedicated in research, design, and development for digital video recorder over the past 15 years and we focus on providing a secure and peaceful life for personal safety and property. Nowadays, we are developed a revolutionary security system in CCTV surveillance field, which is“Prevent Possible Crime”.
For traditional NVR, it is mainly recording criminal behaviors as the evidences. However, what I-View’s NVR can provide is to prevent the possible crime before it actually happens and also record the incidents with PAC-080M Intelligent Sound Alarm system. The final purpose of CCTV system is to prevent the crimes, not just record the actions of crimes. Based on this concept, we utilizes intelligent video analysis to observe and filter out the possible crimes, broadcast automatically the pre-recorded warning voice messages or make announcement toward to each and specific illegal behavior, to reduce and discontinue the possibilities of the crimes. This innovative product will bring a safer, prompter and more thorough protection for the people and society.
The Public Address NVR is not only the DVR to prevent the possible crimes, but also a powerful public address system. It is equipped with functions of schedule/ Individual / Group broadcast and playback background music, which can integrate with fire alarm system. It also can visual broadcasting and monitors the video through Internet from anywhere at anytime. The ability of remote visual broadcasting makes a wide variety application for different environment.

 
  • Warning Broadcast automatically and immediately at special events by intelligent video analytic or Sensor triggered.
  • Stop all paging automatically when Emergency broadcast on.
  • Directly select video or GUI to have emergency, one, group, or all zones broadcast by integration with DVR.
  • The volume of audio alarm can be setup by schedule.
  • Auto turn on (off) amplifier power when broadcasting to save the power consumption and avoid the speaker noise.
  • Built-in surge protector and self- protection (Over heat, loading and wire short) function.
  • Provide the powerful DVR function, to know more detail information, please visit webpage.
  • Remote broadcast (paging) through internet
  • Integrate with fire alarm system for auto broadcasting when blaze.
  • Auto Schedule and manual broadcasting at the specific time and zone.
  • High audio quality best for Background music broadcast.
  • Audio amplifier provides 120W/ 8 zones; the cascade function up to 8 devices and 960 W & 120 zones capability.
  • Provide Start and Daisy Chain structure for saving maintain and installation cost.
  • Multi privilege levels protection and record all operation on view log file.

 

 

 

 

 

Specification
Audio Output (RMS) 120W; 100V / 70V (Selectable) with 8 zones output ports
T. H. D. ≦ 1% @ 1K Hz (1/3 Rated power)
Frequency Response 50 - 15,000 Hz (±3 dB)
Audio Input / Output
MIC: 1 mV @ 600 Ω, XLR jack (Balance)
TEL: 100 mV @ 10 KΩ, Terminal block jack (Balance)
AUX: 100mV@ 22K Ω, 1/4” Phone jack (Balance)
S/N Ratio MIC 65dB or better; AUX 80dB
Tone Control BNC: 75Ω; Terminal Block: 100Ω
Voice Muting Priority MIC On; TEL & AUX are not affected
Communication
Bass: ±10 dB @100 Hz; Treble: ±10 dB @10KHz
Protection
System auto shutdown when over heat, loading or speaker wire short
Extension
Cascade 8 devices up to 960W / 120 zones per system
Dimension
426 (W) × 88.9 (H) × 305 (D) mm; Support 19” Rack Mount
Weight 9 Kg (23.81 lb)
Power Consumption
AC115/230V(320W), DC 24V/10A (Backup Battery)
Power request
Yes
Environmental
0-50℃, Humidity: 0 to 95% (non-condensing)
Dimension 215x55x35 mm
Weight 0.5 Kg
*Product specifications are subject to change without notice.

System Configuration

 





 

Application Diagram

 











    Document typeFile DescriptionProduct NameRelease dateVersionSize DownloadDownloadNote

  • PDFBroadcasting solution Data sheet.pdfData Sheet2014/08/01v 1.03,108.5kdownloadNote